192.168.8.1 Admin Login and Router Passwords for IP 192 l.168.8.1. Change your password and change router settings.

192.168.8.1 Admin Login

192.168.8.1 is a very common default gateway IP address for Chinese users, yet it is often mistakenly assumed to be a “normal home router IP.” Unlike 192.168.1.1 or 192.168.0.1, which are typically used by home Wi-Fi routers, 192.168.8.1 is most commonly used by portable WiFi (MiFi) devices, 4G/5G CPE routers, and mobile broadband devices, especially within the Huawei (HUAWEI) Mobile WiFi ecosystem.

In real-world usage, many users connect to a portable WiFi hotspot or SIM-card router, open a browser, enter 192.168.8.1, and are taken directly to the device’s admin login page. From there, users can change the Wi-Fi name (SSID) and password, check signal strength and network status, manage connected devices, set data limits and roaming options, and configure APN (carrier access point settings).

This guide explains what 192.168.8.1 is used for, which devices use it, how to log in correctly, default usernames and passwords, why the page may not open, and includes a complete 30-question FAQ.

What Is 192.168.8.1 and How Is It Used?

192.168.8.1 is a private IPv4 address belonging to the LAN (local network) address range. It cannot be accessed from the public internet and is used only inside a local network as a default gateway and device management address.

In practice, manufacturers assign 192.168.8.1 as the web management IP for mobile-network devices that use a SIM card to access the internet and then share that connection via Wi-Fi or Ethernet.

You’ll often see it on Huawei portable hotspots (MiFi) and some ZTE 4G/5G routers.

When you open this address in a browser (while connected to the device’s Wi-Fi), you can manage important settings such as:

• Viewing connected devices
• Changing the Wi-Fi name (SSID)
• Changing the Wi-Fi password
• Checking signal, SIM status, and data usage (on many mobile routers)

Devices That Commonly Use 192.168.8.1

Common device types

• Portable WiFi / MiFi devices
• 4G / 5G CPE SIM-card routers
• Mobile broadband gateways
• Travel routers with cellular backhaul

Common brands (especially in China)

• Huawei (HUAWEI) Mobile WiFi & 4G/5G CPE series
• SIM-based routers using Huawei / HiSilicon reference firmware
• Carrier-branded mobile routers derived from Huawei platforms

Important: 192.168.8.1 is not typically used by fiber ONT modems. Fiber gateways usually use 192.168.1.1 or 192.168.100.1. If you see 192.168.8.1, you are almost certainly connected to a mobile (SIM-based) router, not a fiber modem.

Typical Use Scenarios

• Travel and business trips (portable WiFi sharing mobile data)
• Temporary housing without fixed broadband
• Shops, POS systems, and security cameras using cellular backup
• Construction sites and temporary offices
• Student dorms and shared accommodations

192.168.8.1 Login – Quick Guide.

1. Connect your phone or computer to the device’s Wi-Fi (or LAN port).
2. Disable mobile data on your phone.
3. Open a browser.
4. Enter http://192.168.8.1.
5. Enter the admin password (some devices require no username).

After login, you can usually access the network and signal status, connected device list, Wi-Fi SSID and password settings, data usage tools, and firmware update or reboot options.

Default Usernames and Passwords (Important)

Default login credentials depend heavily on brand and model. Many devices no longer use a universal admin/admin login.

• admin / admin (older models)
• Password only (no username field)
• Random password printed on device label
• First-login password creation required

Tip: Always check the label on the device first. This is the most reliable source.

Getting an Error? Don’t Panic

If you see messages like “This site can’t be reached” or “Page loading failed”, the problem is usually simple: either you typed the address wrong, or you are not connected to the correct Wi-Fi network.

One of the most common mistakes is typing “192 l.168.8.1” (with a letter l) instead of the real IP address. That incorrect version will never open a router login page.

192.168.8.1 vs 192 l.168.8.1

Important: “192 l.168.8.1” is not a real IP address. It is a typo.

Correct login IP: 192.168.8.1

Even one wrong character can stop the page from loading, so it’s worth double-checking what you typed.

Common wrong versions that will not work

• 192 l.168.8.1
• 1921688.1
• www.192.168.8.1.com
• http//192.168.8.1
• 192.168.8.l

These mistakes happen a lot on phones because the dot and the letter l are easy to hit by accident. Also remember: you do not need www, and you do not add .com. It’s just an IP address.

How to Access the 192.168.8.1 Login Page – Step-By-Step Guide.

If your device label (or manual) says the admin address is 192.168.8.1, follow these steps.

Step 1: Connect to the right network

• For routers: connect your phone or computer to the router’s Wi-Fi.
• For mobile hotspots (MiFi): connect to the hotspot Wi-Fi name (SSID), which is often printed on the device label.
• For a wired connection: plug your computer into the router’s LAN port using an Ethernet cable.

Step 2: Open a browser and type the address

Open a browser such as Chrome, Edge, Safari, or Firefox. Click the address bar at the top and type:

http://192.168.8.1

Then press Enter (or tap “Go”).

Step 3: Enter the admin login details

When the login page appears, enter the admin username and password.

• If you never changed them, use the default login information printed on the device label.
• If you changed them before, use your updated admin password.

Step 4: Change settings in the admin panel

After you log in, you will see the device’s settings dashboard. Depending on the model, you can usually:

• Change Wi-Fi name (SSID) and password (often under “Wi-Fi”, “WLAN”, or “Wireless Settings”)
• See who is connected to your Wi-Fi
• Restart the device or update firmware
• Adjust network options such as APN, data limits, and roaming (common on SIM-based routers)

192.168.8.1 Usage by Country

Below are country-specific notes explaining how 192.168.8.1 is commonly used, including typical ISPs, router brands, and institutions that deploy mobile routers.

192.168.8.1 in Saudi Arabia

Common use: 4G/5G CPE routers, portable WiFi for home and office, and business backup internet.

ISPs: STC, Mobily, Zain KSA.

Common router brands: Huawei 4G/5G CPE, ZTE CPE routers, carrier-branded Huawei MiFi units.

Note: Many Saudi ISPs distribute Huawei-based CPE routers, and 192.168.8.1 is frequently retained as the admin IP.

192.168.8.1 in Sri Lanka

Common use: portable WiFi hotspots and SIM-based home internet.

ISPs: Dialog, Mobitel, Hutch, Airtel Sri Lanka.

Common brands: Huawei Mobile WiFi, ZTE pocket routers, and rebranded carrier devices.

192.168.8.1 in Algeria

Common use: 4G LTE home routers and portable WiFi units.

ISPs: Algérie Télécom, Mobilis, Djezzy, Ooredoo Algeria.

Common brands: Huawei CPE routers and ZTE LTE routers.

192.168.8.1 in Egypt

Common use: home 4G routers and portable WiFi for students and travel.

ISPs: WE (Telecom Egypt), Vodafone Egypt, Orange Egypt, Etisalat Egypt.

Common brands: Huawei B-series CPE, ZTE MF series, and ISP-locked Huawei routers.

192.168.8.1 in Oman

Common use: 4G/5G home CPE and business backup routers.

ISPs: Omantel, Ooredoo Oman.

Common brands: Huawei 5G CPE Pro and ZTE CPE units.

192.168.8.1 in Syrian Arab Republic

Common use: portable WiFi hotspots and mobile routers used by households, small businesses, and NGOs.

Providers: Syriatel, MTN Syria.

Note: Huawei-based mobile routers are common due to regional availability and carrier distribution patterns.

192.168.8.1 in the Philippines

Common use: LTE home WiFi and pocket WiFi units for travel and daily use.

ISPs: Smart, Globe, DITO.

Common brands: Huawei LTE routers, ZTE MiFi devices, and carrier-branded Huawei firmware.

192.168.8.1 in China

Primary use case: China is one of the largest markets for 192.168.8.1-based devices, especially Huawei Mobile WiFi and SIM-based CPE routers.

ISPs: China Mobile, China Unicom, China Telecom.

Brands: Huawei Mobile WiFi, Huawei 4G/5G CPE, and carrier-custom Huawei firmware.

192.168.8.1 in Pakistan

Common use: LTE home routers and portable WiFi units distributed by mobile carriers.

ISPs: Jazz, Zong, Telenor, Ufone.

Common brands: Huawei LTE CPE and ZTE routers.

192.168.8.1 in Ghana, Morocco, Ethiopia, and Botswana

Across these regions, usage patterns are similar: 192.168.8.1 is commonly used for SIM-based routers, portable WiFi, and LTE/5G CPE devices.

Common ISPs

• MTN (multiple countries)
• Orange
• Vodafone
• Local mobile operators

Common devices and brands

• Huawei LTE / 5G CPE
• ZTE mobile routers
• Carrier-branded mobile WiFi devices

Admin IP note: Where Huawei reference firmware is used, 192.168.8.1 is frequently preserved as the default admin login address.

192.168.8.1 Router Login Passwords and Usernames

As a default login IP, 192.168.8.1 is commonly used by portable WiFi (MiFi) devices, 4G/5G CPE SIM-card routers, travel routers, and some portable gateway devices. Default login details can vary widely by brand and model. Some devices use fixed credentials (for example, admin/admin), some ship with a blank password or require you to create one during first-time setup, and others print a random admin password on the device label.

To avoid using the wrong credentials, keep these rules in mind:

• If the username or password shows as “None / Blank / —”, it usually means the device has no default login set or it requires first-time initialization.
• The same model may have different firmware versions, and the default login can change between versions.
• The most reliable source is still the label on the back/bottom of the device (nameplate) and the user manual.

3JTech

Aceex

Adaptec

Eminent

GL.iNet

Huawei (HUAWEI)

IGNITION Design Labs

Medialink

Nexx

Pyramid

WRTnode

Usage Tips (Very Important)

• If the table shows “Not disclosed / None / Blank”, check the device label or manual first, because many new devices use a random admin password.
• After you log in, change the admin password immediately and keep it different from the Wi-Fi password.
• If the device supports remote management or cloud management, turn it off unless you truly need it.

Why You Cannot Access 192.168.8.1 (Common Causes)

1) You are not connected to the correct network

You must connect to the Wi-Fi broadcast by the device (or connect by Ethernet directly to its LAN port). Many people stay connected to their home router and then try to open 192.168.8.1, so the page will not load. Check your Wi-Fi details and confirm the hotspot name (SSID) matches your MiFi/CPE device.

2) Your phone is still using mobile data

On phones, the browser may prioritize 4G/5G data, causing 192.168.8.1 to fail or load forever. Turn off mobile data, enable airplane mode, then turn Wi-Fi back on only. This forces the phone to use the local network.

3) The address is typed incorrectly (most common)

• 192.168.8.l (typing a lowercase “l” instead of the number 1)
• 192.168.8.1/ (extra characters, spaces, or a bad copy-paste)
• 19216881 (missing dots)
• https://192.168.8.1 (many devices support HTTP only; HTTPS may error)

4) IP conflict or the LAN subnet has changed

If there is already a 192.168.8.0/24 network in your environment, an IP conflict can occur and the device’s management address may change. In that case, check the real “Default Gateway” for your current connection, reboot the device, and try again. Some devices automatically switch to a different address (for example 192.168.9.1), so checking the gateway is the most reliable method.

5) The management port was changed (you may need a port number)

Some devices change the admin port from the default 80 to 8080, 8000, and similar. You must then use an IP:port format such as http://192.168.8.1:8080. If you do not know the port, check the device label or user manual first.

192.168.8.1 Summary

192.168.8.1 (１９２．１６８．８．１) is a private IPv4 LAN address and a common value used as a local default gateway. It cannot be accessed directly from the public internet. In China, it is most often used for portable WiFi (MiFi) devices, 4G/5G CPE SIM-card routers, and mobile broadband gateways, and it is especially common in Huawei (HUAWEI) Mobile WiFi/CPE device ecosystems. To reach the admin page, you usually need to connect to the device’s Wi-Fi (or connect via Ethernet), then enter http://192.168.8.1 in your browser.

After logging in, you can typically do the following: check signal strength and network mode (4G/5G), confirm SIM status and dialing/connection state, manage connected devices, change Wi-Fi name (SSID) and Wi-Fi password, set up a guest network, limit the number of connected users, enable a blacklist/whitelist, view data usage statistics, upgrade firmware, reboot the device, and configure APN settings when needed. If you are connected to Wi-Fi but cannot access the internet, the device status page usually helps you quickly determine whether the issue is on the mobile network side (no credit/service suspended, weak signal, wrong APN, plan restrictions) or on the Wi-Fi side (wrong password, too many connected devices, configuration conflicts).

When it comes to default login details, the username and password for 192.168.8.1 devices depend heavily on the brand and model and are not always the same admin/admin combination. Many new devices print the admin password on the label or force you to create one during first login. Many mobile-router web interfaces do not even have a username field and require only a “login password.” If the page will not open or keeps loading, the most common causes for Chinese users include: not being connected to the device’s network, the phone still using 4G/5G data, typing “l” instead of “1”, missing a dot, using HTTPS by mistake, or a changed management port requiring an address like http://192.168.8.1:8080 or http://192.168.8.1:8000. If you still cannot confirm the correct admin entry, checking the current connection’s “Default Gateway / Router Address” is usually the most reliable method.

192.168.8.1 FAQ.

1. Is 192.168.8.1 an official website?

No. 192.168.8.1 is not any company’s official website and it is not an internet site. It is a local network management address, and it will only open when you are connected to the correct device’s Wi-Fi or Ethernet network. If you leave that network (for example, you switch to mobile data), you will not be able to access it.

2. What kind of device usually uses 192.168.8.1?

In China, the most common devices are portable WiFi (MiFi) hotspots and 4G/5G CPE SIM-card routers. They use a SIM card to get internet access, then share that connection to phones and computers. If you see 192.168.8.1, it usually means you are connected to a “mobile router / portable hotspot,” not a fiber modem (ONT).

3. What is the difference between 192.168.8.1 and 192.168.1.1?

Both are private LAN management addresses, but they are commonly used by different device types. 192.168.1.1 is more common on home Wi-Fi routers and some fiber modems. 192.168.8.1 is more common on portable WiFi devices and SIM-based CPE routers. Which one works depends entirely on which network you are currently connected to.

4. Can I log in to 192.168.8.1 on my phone?

Yes, as long as your phone is connected to the Wi-Fi network of that device. It is recommended to turn off mobile data so the browser does not try to use the public network. After you log in, you can usually change the Wi-Fi name and password, view connected devices, and check signal and data usage.

5. Why can’t I open 192.168.8.1 even though I can still access the internet?

You might not be connected to the device’s main network. You could be on a guest network, or behind a downstream router that is forwarding the connection. Another possibility is that the management address was changed and the real gateway is not 192.168.8.1 anymore. The easiest fix is to check your current Wi-Fi “Gateway / Router Address” and use that IP instead.

6. Why does typing 192.168.8.1 send me to a search page?

This usually happens because you typed the IP into the browser’s search box instead of the address bar. The browser treats it as a keyword and searches the web. Tap/click the address bar at the top, enter http://192.168.8.1, then press Enter.

7. Should I use http or https to access 192.168.8.1?

Most MiFi/CPE web admin pages use HTTP by default. If you use HTTPS, you may get a certificate warning, or the page may not load at all. Unless the device clearly supports HTTPS, it is best to use http://192.168.8.1.

8. What are the default username and password?

Many older devices use admin/admin, but newer devices often print the admin password on the label or force you to create a password during first login. Some devices do not have a username field and require only a login password. The most reliable method is to check the device label or the manual.

9. What if I forgot the 192.168.8.1 admin password?

In most cases, you must use the Reset button to restore factory settings. After resetting, the admin password returns to the default state or you will be asked to create a new one. However, this also clears APN settings, Wi-Fi name and password, and other configuration. Before resetting, take photos/screenshots of your current settings, especially APN and dialing-related information.

10. Can I change the Wi-Fi password from 192.168.8.1?

Usually yes, and it is one of the most common settings. You can change the SSID (Wi-Fi name) and password and choose an encryption method (WPA2/WPA3 is recommended). After changing it, your phone and computer will need to reconnect using the new password.

11. Can I see who is using my Wi-Fi (who is “stealing” the network)?

Most devices show a “Connected Devices / Client List” page. You can usually see device names, MAC addresses, assigned IPs, and sometimes connection time and data usage. If you find unknown devices, change the Wi-Fi password first, then block the device or limit access.

12. Can I limit the number of connected devices?

Many MiFi/CPE devices allow you to set a maximum number of connected users, such as 5 or 10. This can improve stability and reduce slowdowns caused by too many users. The setting may be called “Maximum Users” or “Wi-Fi Client Limit.”

13. Can I set a blacklist or whitelist?

Many devices support MAC filtering or access control. You can whitelist your own devices so only approved devices can connect, which improves security. Be careful: if you enable filtering without adding your own device first, you could block yourself. Always confirm your device MAC address is allowed.

14. Why does the 192.168.8.1 page load but look blank, or buttons don’t work?

This is often caused by browser compatibility or cached files. Try Chrome or Edge, or open an incognito/private window and try again. Also consider disabling ad blockers or script blockers, because they can break the admin interface.

15. Can I change APN settings after logging in?

Many SIM-based routers support APN configuration, especially for IoT SIMs, enterprise SIMs, or when using a different carrier/region. If the APN is wrong, you may have signal but no internet, or only some services may work. Before changing it, record the original APN so you can restore it if needed.

16. Why does it show “connected to Wi-Fi but no internet”?

This usually means Wi-Fi is connected, but the mobile network is not successfully connected or has no usable data. Common causes include SIM service suspended/no balance, weak signal, incorrect APN, or plan restrictions. Check the admin status page for signal strength, network mode (4G/5G), SIM status, and dialing/connection state.

17. Can I switch between 2.4GHz and 5GHz?

It depends on whether the device supports dual-band Wi-Fi. Dual-band CPE devices usually let you set separate names and passwords for 2.4GHz and 5GHz, and some offer a “same SSID” combined option. For coverage, 2.4GHz is usually better; for speed, 5GHz is usually faster at close range.

18. Can I update the firmware?

Many devices offer “System Upgrade / Firmware Update” in the admin panel. Updates can improve stability and compatibility and may adjust signal strategies. However, updates can also change the interface or restrict certain features. Make sure the device has stable power and do not disconnect power during an update.

19. Can I set DNS?

Some devices allow custom DNS settings, while others only support automatic DNS. Changing DNS can sometimes improve resolution speed or fix domain access problems. If you are not sure what to use, keep it on automatic to avoid breaking internet access for all connected devices.

20. Can I set port forwarding?

Many mobile routers are not ideal for traditional port forwarding because mobile networks often use NAT/CGNAT, which blocks inbound public connections. Even if you configure port forwarding, you may not be able to access your device from outside the network. If you truly need remote access, you may need a public IP, a special enterprise SIM, or a VPN solution.

21. Why is my device management address not 192.168.8.1?

The manufacturer may use a different default IP, or the device may change its IP during a conflict. Another common reason is that you connected a downstream router, and you are actually seeing the downstream router’s gateway instead. The most accurate method is always to check your current connection’s “Default Gateway / Router Address.”

22. What does 192.168.8.1:8080 / :8000 mean?

This means the admin service is not running on the default port 80. It has been changed to ports like 8080 or 8000. You must use the IP:port format, otherwise the browser will not find the admin page. Port information is often listed on the label, in the manual, or in the carrier’s setup guide.

23. Do I need to install an app to access 192.168.8.1?

Not necessarily. The web admin page can handle most basic settings. Some devices also offer an official companion app for easier setup and for checking signal and data usage. If you do not want an app, using the browser is still completely fine.

24. Can I change the Wi-Fi name (SSID)?

Usually yes, and it is recommended. Renaming the Wi-Fi makes it easier to recognize your hotspot and avoid connecting to the wrong network. After changing the SSID, you will need to reconnect to the Wi-Fi network.

25. Can I set up a guest network?

Many MiFi/CPE devices support a “Guest Wi-Fi” feature. A guest network can isolate visitors from your main local network and reduce the risk of unknown devices accessing your internal devices. You can set a separate password and sometimes a time limit for guest access.

26. Can I see signal strength and network bands?

Most mobile-router admin panels show signal bars and sometimes detailed metrics such as RSRP/RSRQ, plus the network mode (4G/5G) and carrier information. Weak signal can cause slow speed, high latency, and frequent disconnects. Try moving the device near a window and away from metal obstacles to improve signal.

27. The page says “wrong password” but I’m sure it’s correct. Why?

A common reason is that you entered the Wi-Fi password instead of the admin password. These are often different. Another possibility is that someone previously changed the admin password, so the default is no longer valid. Check the device label first, and if necessary, reset the device to factory settings.

28. What does resetting the device affect?

Resetting usually clears the Wi-Fi name and password, admin password, APN settings, blacklist/whitelist rules, and data usage statistics. After reset, you must set up the network again, and some devices may require carrier parameters. Before resetting, take screenshots/photos of important settings pages.

29. Can 192.168.8.1 improve my internet speed?

The admin panel itself cannot “directly increase” speed, but you can optimize settings to improve real-world performance. For example, you can switch to 5GHz Wi-Fi, choose a better Wi-Fi channel, limit unknown devices, or adjust network mode/APN. Actual speed still depends mainly on signal quality, base-station congestion, and plan limits.

30. What do China users most commonly use 192.168.8.1 for?

The most common use is logging in to the MiFi/CPE admin page to change the Wi-Fi name and password and check connected devices. The second most common use is troubleshooting when Wi-Fi connects but the internet does not work, by checking SIM status, signal, and dialing/connection information. If you understand how to use 192.168.8.1, you can quickly tell whether the problem is on the Wi-Fi side or the mobile-network side.